How to restart your ICO ?

It is sometimes necessary to restart your ICO, particularly before calibrating the probes. If your ICO is in water, take it out and dry it thoroughly with a soft cloth.

In order to easily restart your ICO, you can do it directly through the application (option 1). If this action fails, you must turn ICO off and on again (option 2).

Option 1: restart ICO via the application

• Activate your phone's Bluetooth connection
• Place your ICO device and smartphone next to each other
• Open the ICO application
• Click on the icon Remote control. When the Bluetooth connection is established, the Bluetooth icon will turn blue and the remote control buttons will become available.
• Click on Restart

Wait a few moments:

• A check mark indicates that ICO has restarted. check your data on the pool or spa profile

• A cross indicates that the action has failed:  try again, otherwise try manually (option 2).

Option 2 : turn off then turn on ICO

• Open the outer and inner cover of your ICO using the tool provided

• To turn off ICO, press the on/off button for 5 to 6 seconds: the LED flashes orange

• To turn on ICO, press the on/off button for 5 to 6 seconds: the LED flashes green

• Replace the inner and outer covers, ensuring that the notch is aligned, to ensure a tight seal

Put ICO back in the water and verify the last measurement

Put the ICO back in the water. After 5 minutes, check in the ICO application that you have received a measurement on restart.